Index > Wire Rope Products > Wire Rope Gauges
Page: 1  2  3  4  5  6  7  8  9    Next 

Acceleration Sensor PS1 (for use with Henning ELVI System)

Part #: 452005

For use with ELVI system


Login or
Create an Account
to view pricing.


Analog Wire Rope Tension Gauge

Part #: 10-650

This rope tension gauge is easy to assemble, easy to use and accurate. Unequal rope tension increases wear and tear and shortens rope life. The rope tension gauge measures relative tension in ropes allowing you to adjust for equal tension.

Login or
Create an Account
to view pricing.


Bluetooth Antenna (for use with Henning ELVI System)

Part #: 450065

For use with ELVI system


Login or
Create an Account
to view pricing.


Bluetooth USB Adaptor (for use with Henning ELVI System)

Part #: 450070

For use with ELVI system


Login or
Create an Account
to view pricing.


Calibration for Hydraulic Sensor (part#450600)

Part #: 450601

Service should be once per year Lead Time: 3 months Delivery Condition: ex works Shwelm, Germany


Login or
Create an Account
to view pricing.


Digital Sheave Groove Gauge

Part #: 16-501

With this digital sheave groove gauge users can quickly measure directly within the sheave groove itself in order to gauge and verify the presence of groove variations and/or groove wear. Now with GDC you can measure groove depths through direct contact within the sheave groove itself. The user simply lowers GDC into a groove and allows the ball plunger to contact the groove walls. The first measurement serves as a set point which is then used to compare the variances in each successive sheave groove. All variance measurements are prominently displayed within the digital screen area in either imperial or metric units. A positive (+) reading signifies that a groove depth is shallower than the first groove measured (the initial set point) while a negative (-) reading indicates a deeper groove depth, and is evidence of groove tolerance or sheave wear.


Login or
Create an Account
to view pricing.


Direct Connector

Part #: 452150

Direct gauge adaptor G1/4"


Login or
Create an Account
to view pricing.


Gauge, Sheave Groove, 102mm-120mm, Kit

Part #: 16-505

11 Gauge Stainless Steel Sizes: 102, 104, 106, 108, 110, 112, 114, 116, 118, 120MM. Includes: 16-503C (Wurtec Carabiner)


Login or
Create an Account
to view pricing.


Gauge, Sheave Groove, 40mm-70mm Kit

Part #: 16-503

11 Gauge Stainless Steel, Sizes: 40mm, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70mm. Includes: 16-503C


Login or
Create an Account
to view pricing.


Groove V Measuring Tool

Part #: 500000

This simple angle-measuring tool will help you check traction sheaves for wear and tear, for example measuring the rope-grooves of worn traction sheaves. The tool is meant for measuring and checking V-grooves with or without undercut. It resembles a slide gauge and has a base with a scale of degrees. Hold the tool at right angle to the groove and shift the measuring limb to the opposite flange of the V-groove until it sits close to it. Angle-measuring tool, range 25°-70°.


Login or
Create an Account
to view pricing.


Page: 1  2  3  4  5  6  7  8  9    Next