Page: 1  2  3  4    Next 

Alignment Gauge, Dual Laser 3/4"

Part #: 10-114-15

Snap this gauge onto the face of a rail using the magnet provided. The gauge will stay attached to the rail allowing you to make any adjustments you need. The gauge is made of lightweight plastic and has the laser alignment gauges installed to match the position of the dual line laser gauges.

Login or
Create an Account
to view pricing.


Alignment Gauge, Dual Laser 5/8"

Part #: 10-114-15A

Snap this gauge onto the face of a rail using the magnet provided. The gauge will stay attached to the rail allowing you to make any adjustments you need. The gauge is made of lightweight plastic and has the laser alignment gauges installed to match the position of the dual line laser gauges.

Login or
Create an Account
to view pricing.


Clamp-On Rail Gauge Mounted To The Rail Face

Part #: 10-114-19

This precision machined aluminum rail gauge is equipped with a specially designed laser target. The special lens material makes it much easier to see the position of the laser beam on the target. The gauge can be clamped to the rail so adjustments can be made quickly and with both hands.


Login or
Create an Account
to view pricing.


Complete Single Laser Beam System For T-Rail

Part #: 10-114-SBL1

This complete laser kit from Wurtec will work on T-rails. All brackets required to mount the laser along with the necessary targets are provided. Entire kit is shipped in its own plastic carrying case. Kit includes: (1) PLS3 Lasers; (1) Magnetic laser bracket; (1) Aluminum Clamp-on-target; (1) Platt hard side case.

Login or
Create an Account
to view pricing.


Complete Single Laser Beam System For T-Rail And Omega Rail Kit

Part #: 10-114-SBL2

This complete laser kit from Wurtec will work on T-Rails and Omega rails. All brackets required to mount the laser along with the necessary targets are provided. Kit includes: (2) PLS3 Lasers; (1) Magnetic Laser Bracket; (2) Round Rail Brackets; (1) Aluminum Clamp-on-target; (1) Platt hard side case; (2) laser shims.

Login or
Create an Account
to view pricing.


Dual Laser Bracket, 3/4"

Part #: 10-114-34

The dual line laser mounting bracket is designed to allow you to mount two PLS3 lasers on the face of the rail. Simply attach the brackets to the rail face and then attach the individual laser to each mounting location.

Login or
Create an Account
to view pricing.


Dual Laser Bracket, 5/8"

Part #: 10-114-58

The dual line laser mounting bracket is designed to allow you to mount two PLS3 lasers on the face of the rail. Simply attach the brackets to the rail face and then attach the individual laser to each mounting location.

Login or
Create an Account
to view pricing.


Fast Track Bracket, Synergy L Bracket

Part #: 11-330-B

The fast track hoist bracket has been designed to allow the hoisting of your car sling with a cable climber. The bracket is installed in the center of the car and lifts from under your crosshead. Adjustable stops that prevent it from slipping out from under the crosshead channels are provided. Comes complete with short hoist bar. The capacity of the bracket is 2500 lbs.


Login or
Create an Account
to view pricing.


Laser Alignment Tool For 5/8" Rail

Part #: 10-114

Wurtec's laser alignment kit provides a contemporary solution to an age old problem, proper rail alignment. Our system allows you to position your rails properly in the hoistway and to align them straight and plumb without ever having to drop a line. The heart of the kit is a self-leveling PLS3 laser, accurate to within 1/4" per 100'. The laser can be mounted either directly to a rail or to the pit floor using our specially designed mounting bracket. The plumbing of the rail is accomplished using our clamp-on rail gauge.

Login or
Create an Account
to view pricing.


Laser Concentrator Gauge for 5/8" Rail

Part #: 10-114-18

Laser beams diffuse and widen the farther they get from their source making it hard to determine the exact center of the beam. The laser concentrator gauge has been designed to concentrate and re-focus the beam of the laser as it strikes the target. Simply place the concentrator gauge on a section of rail that has been aligned and is some distance away from the laser source. Since only a portion of the laser beam can pass through the concentrator gauge it removes much of the diffused beam and re-focuses the remaining beam providing a smaller more focused beam on your target.


Login or
Create an Account
to view pricing.


Page: 1  2  3  4    Next